headlight tinting in swanseaSPi Vision is headlight and rear cluster tinting mesh that sticks to the outer surface of any light creating that factory finish dark smoke effect. The Headlight Tinting Film if fully Road Legal and MOT Compliant.  This Headlight and Rear Light Tint Mesh is waterproof and durable which can be washed and treated like any other surface on your vehicle. There will bw no need to remove the light fitting during the install. SPi Vision has excellent durability with great resistance to most road and weather conditions. SPi Vision Light Tint is manufactured to conform to most light contours and should be installed quickly and if needed removed with little or no adhesive residue. If you require headlight or rear light tinting in Neath, Port Talbot or Swansea area then please get in touch

car and 4x4 light tint legal in swansea and neath, port talbot wales
SPi headlight Tinting Mesh Product

SPi – Vision Guide Note

Please note that high-intensity discharge light bulbs (H.I.D/Xenon) may cause excessive heat build-up under sustained high beam use. This may result in melting of the SPi Vision vinyl. Normally if the high-beam bulb has a silvered tip or a cowling in front of it, then this should be acceptable. If you are fitting this product to headlights, check your headlight configuration before applying. Those light clusters that have a protective coating or lacquer are unsuitable for applying SPi Vision. Like many vinyls it may damage this coating when the SPi Vision is removed. You should check for a protective layer before any installation of the SPi Vision.

swansea and neath, port talbot, window and 4x4 tinter services
SPi Vision Rear Cluster

MOT rules and regulations state:

[box] 1.2: Headlights A pair of headlights must: emit light of substantially the same colour and intensity. emit a steady colour of either white or yellow. be visible from a reasonable distance. 1.3: Brake lights A brake light must emit a steady red light. At least 50% of the lamp must be visible from the rear Light must be visible from a reasonable distance 1.4: Reflectors At least 50% of the reflecting surface must be visible from a reasonable distance. 1.5: Indicators Every indicator must emit amber light. At least 50% of the lamp must be visible. Light must be visible from a reasonable distance. Masks, or converter kits. A headlamp or rear tail lamp altered in this way is not a reason for MOT rejection. So long as light outputs are not adversely reduced, it emits the appropriate correct colour and the mask is securely attached. [/box]

SPi Vision Tinting Services for your Car/Vehicle, Business or Home. Covering , South Wales, Neath, Swansea, Port Talbot, Bridgend, Merthyr Tydfil, SA1, West Glam, Aberdare & Pontardawe